company news about Multilane joint many famous manufacturers of common power 800 g test

In OFC2023, Multilane and several well-known manufacturers jointly exhibited 800G interoperability verification and integration of jitter and noise error meter ML4079EN and SITOL test suite, as well as many advanced test and measurement solutions. Here is a brief introduction to Multilane's latest solutions:

MultiLane introduces the ML4079EN, the industry's innovative pressure eye error meter test solution. Integrate jitter and noise test solution ML4079EN error meter with SITOL test suite. SITOL integrates an Interference Tolerance, Jitter Tolerance and Jitter Margin test to ensure that your design can meet the requirements of the single-channel 112G PAM4 ecosystem. The ML4079EN jitter injection capability is three times the standard set by IEEE. MultiLane takes the IEEE standard to another level. With automated jitter and noise solutions, we are not only able to accurately determine whether the DUT is elastic enough to work reliably in real-world applications, but also calibrate the margin for jitter tolerance. This provides a crucial validation scheme for the more resilient design of 800G ecosystems.

MultiLane provides the industry with seamless host/module interoperability between multiple interconnects through its new 800G Nexus Analyzer. The increasingly complex SerDes architecture requires the adoption of equally complex standards to ensure link reliability. CMIS compliance provides a uniform way to provide firmware interoperability at 800 gigabytes. Industry adopters are forced to invest significant engineering resources to achieve full CMIS compliance with various network partners. MultiLane Nexus Analyzer provides a powerful set of debugging tools that simplify CMIS interoperability testing. The Nexus Analyzer feature takes some of the most time consuming parts of CMIS/SFF validation and displays them in an easy-to-read GUI, including: State machine and data path state machine testing, inrush current measurement from the host side, I2C R/W commands and packet analysis in target, initiator, and bypass modes, and CMIS/SFF register scanning to provide page-by-page register validation.

"MultiLane's positive contribution to the growing CMIS specification allows us to provide a solution that meets the specific needs of work in this field," said Rachad Samaha, general Manager of MultiLane's Data Center Testing Solutions division. . "Many of the features of the Nexus Analyzer can significantly reduce typical engineering time for interoperability testing."

The industry is already planning the next phase of 1.6T Ethernet due to the increasing bandwidth demands of very large data centers. Designed to run on 16 channels with 112G PAM4 signals per channel, one of the leading multi-source protocols driving the development of 1.6T interconnects, MultiLane offers a complete suite of OSFP-XD test fixtures in exchange for MCB test fixtures, HCB Test fixture with thermal load & control board. OFC2023 Multilane and Amphenol demonstrate the thermal load & control board solution for thermal design verification.

With the accelerated growth of super-scale data centers, Ethernet performance requirements are increasing, infrastructure is growing exponentially, and customer expectations for high-speed data throughput are at an all-time high. Arbitrary waveform generators are ideal general purpose development tools for high performance, and are coherent module development and validation. The ML4100L-AWG consists of four differential transmission channels and can be used as an arbitrary waveform generator (AWG) or pulse generator mode (PPG). Suitable for High-Speed SerDes Testing of MIPI C/D-PHY, MIPI MPHY, PCIe5, USB4 and others, and can be injected jitter for pressure testing.