Home Products

Optic Fiber Tester

China Optic Fiber Tester

Six Motors Automatic Fiber Fusion Splicer Welding Main Line Leather Fiber Welding

Alignment method:core alignment

Splicing time（typical）:7s（Fast mode）

Tension test:1.96 ~ 2.25 N
Handheld LanWDM Four Wavelength Light Source + Optical Power Meter

Working mode:illuminant/Optical power meter

Device type:InGaAs

Fiber type:Single mode
Handheld Optical Power Meter Optical Fiber Power Detection

Calibration wavelength（nm）:850、1300、1310、1490、1550、1625

Probe type:InGaAs

Detector area:Ф0.3mm(Ф1.0mm optional)
10G Full Rate Single Mode / Multi - Mode Optical Oscilloscope

standard rate:1.2442/1.25/2.4884/2.5/6.0/9.953/10.3125/10.709/11.3 Gbps

Digital measurement system:Support 1 optical channel measurement, refresh optional measurement 3 times per second

Signal acquisition mode:Sampling (Normal), Envelope, Average
100Gbps Multi - Frequency Division Clock Recovery Instrument

Data rate range:25.6~28.1(Gbps)

Clock recovery output frequency division ratio:2 / 4 / 8 / 16 / 64 / 256

Output electrical clock amplitude:800（Typical value）
Fusion Splicer 3 Seconds Start 7 Seconds Dissolve 18 Seconds Heat

Alignment mode:Core alignment and cladding alignment (four motors)

Applicable optical fiber:Common optical fibers, leather wires, jumpers, etc. in accordance with ITU-T G.654-655 and ITU-T G.657 regulations

Tension test:1.96 ~ 2.25 N
The Electrically Controlled Polarization Generator Highly Efficient

Model:U8340

Wavelength Range:1200 ~ 1610 nm

Insertion Loss:< 1.0 dB
Polarization Mode Dispersion PMD Device Polarization Generator

Principle:4 Motorized Fiber Knob Loop

Polarization Extinction Ratio:40 dB

Rotation Speed Dynamic Range:1600 step
Handheld Lan WDM Four - Wavelength Light Source And Optical Power Meter

Working mode:light source/optical power meter

Output wavelength/Probe wavelength:1271, 1291, 1311, 1331 nm

Fiber Type:single mode
Large Size LCD Display With Handheld Stable Light Source Is Widely Used

Light source type:FP / LD

Wavelength (nm):1310/1550（Single mode, multi-mode 5 wavelengths available）

Output stability (dB):±0.05 (18 hours)
Handheld Dual-Wavelength Light Source Multi-Wavelength High Stable Output

Light source type:FP / LD

Wavelength (nm):1310/1550

Output power (dBm):≥-7
32Gbaud PAM4 CDR Support For NRZ And PAM4 Signals Clock Recovery Module

Wavelength range (single mode):1250~1650 nm

Optical input range:-15~+5 dBm

CML clock differential output amplitude:200~800 mVpp

Page 2 of 3|< << 1 2 3 >> >|

Browse Categories：

Optic Fiber Tester

China Optic Fiber Tester

Six Motors Automatic Fiber Fusion Splicer Welding Main Line Leather Fiber Welding

Handheld LanWDM Four Wavelength Light Source + Optical Power Meter

Handheld Optical Power Meter Optical Fiber Power Detection

10G Full Rate Single Mode / Multi - Mode Optical Oscilloscope

100Gbps Multi - Frequency Division Clock Recovery Instrument

Fusion Splicer 3 Seconds Start 7 Seconds Dissolve 18 Seconds Heat

The Electrically Controlled Polarization Generator Highly Efficient

Polarization Mode Dispersion PMD Device Polarization Generator

Handheld Lan WDM Four - Wavelength Light Source And Optical Power Meter

Large Size LCD Display With Handheld Stable Light Source Is Widely Used

Handheld Dual-Wavelength Light Source Multi-Wavelength High Stable Output

32Gbaud PAM4 CDR Support For NRZ And PAM4 Signals Clock Recovery Module

Tunable Laser Source

Multichannel DFB Laser Source Adaptor Customized Fast Startup Speed

4 Channels Tunable Laser Source Stabilized Light Source Measurement Accuracy

DFB Coaxial Light Source Customizable Wavelength Stability 0.01dB

DFB Laser Source

1550nm 1570nm 1590nm Distributed Feedback Laser Source DFB

Multichannel DFB Laser Source 1490nm 1510nm 1530nm

1604nm Special Wavelength Laser Power Source Butterfly Wavelength Accuracy 2nm